Shijiazhuang Hongtai Rubber Co., Ltd.

  • Name: HT208
  • Views : 244

Product Data Sheet

 

HT208

 

DESCRIPTION:

 

HT208 is a carboxylated butadiene-acrylonitrile copolymer latex with a high acrylonitrile level. The dispersion contains an anionic emulsifier system and is stabilized with an antioxidant.

 

SPECIFICATIONS:

Solids Content                                                                                  43.5 -45.5 %

 

pH                                                                                                          8.0-8.4

 

Viscosity                                                                                             100 Maximum

 

Surface Tension                                                                                25-35 dynes/cm

 

Residual Acrylonitrile,ppm                                                            40 maximum

 

 

 

 

APPLICATIONS:

 

•        Unsupported thin gloves – Medical Exam

 

•        Unsupported thin gloves – light industrial

 

•        General purpose - household gloves

 

FEATURES:

 

•        Low Modulus, Excellent tensile strength, Good oil, grease and chemical resistance

 

•        Excellent puncture resistance, Very good mechanical stability

 

•        FDA 21CFR 177.2600

 

 

GENERAL INFORMATION:

 

Storage at temperatures between 5°C to 30°C is recommended. Prevent exposure to freezing temperatures and temperatures higher than 40°C. Storage tanks should be stainless or of coated material and should incorporate adequate agitation.

 

SHIPPING INFORMATION:

 

Available in- 20MT Flexibag or 1 MT totes

 

 

PLEASE READ THE HT208 MATERIAL SAFETY DATA SHEET BEFORE HANDLING, STORING, OR USING THIS

 

MATERIAL

 

This information is general information designed to assist our customers to determine whether our productions are suitable for their applications. This information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. This information does not release you from the obligation to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you are entirely your own responsibility.